Adding devices to Monitor (Quick tour).

To add a new device to be monitored by OverTime Solo, from the \OverTime\bin directory run a command like:
otadd -c public 10.1.1.1
where "public" is the SNMP read community string fro the device at address 10.1.1.11

Output like this might follow:
Otadd Version 1.3.10.31 2001/11/25
(c)Copyright 2000 - 2001 Net Improvement Consulting Pty Limited
10.1.1.11,NETic-SW,NETic-SW
Generate the interfaces to collect on
Create configuration based on I/O
1 0 10000000 "( ): 1<BR> 1 "
2 0 10000000 "( ): 2<BR> 2 "
3 0 10000000 "( ): 3<BR> 3 "
4 0 10000000 "( ): 4<BR> 4 "
5 0 10000000 "( ): 5<BR> 5 "
6 0 10000000 "( ): 6<BR> 6 "
7 0 10000000 "( ): 7<BR> 7 "
8 0 10000000 "( ): 8<BR> 8 "
9 0 10000000 "( ): 9<BR> 9 "
10 0 10000000 "( ): 10<BR> 10"
11 0 10000000 "( ): 11<BR> 11"
12 0 10000000 "( ): 12<BR> 12"
25 0 10000000 "( ): AUI<BR> AUI"
26 0 100000000 "( ): A<BR> A "
27 0 100000000 "( ): B<BR> B "
Create the system names file C:\OverTime\overtime.csv
Update the main HTML file index.html
OverTime Add/Update Completed

That's all you have to do!