The new sensorProbe2 is an intelligent 2 port sensor
device for monitoring environmental variations,
power, physical threats and security. The SP2 is
a completely embedded host with a proprietary Linux
like Operating System, including TCP/IP stack, Web
server, email, SMS and full SNMP functionality.
The new sensorProbe2 comes with a new CPU that is
3 times faster compared to the earlier version
of sensorProbe2A, faster network connection, new
web interface similar to sensorProbe8
series of products including the subnet mask and remote
syslog interface. It also includes a battery backed
time of day clock. The new sensorProbe2 also has
advance events filtering options. Now you can plug
in our motion detector to the new sensorProbe2.
An important feature in the new sensorProbe2 is, the
integration with a single chip of relative humidity
and temperature sensor module comprising a
calibrated digital output. The sensor includes a
capacitive polymer sensing element for relative
humidity and a bandgap temperature sensor. Both
are seamlessly coupled to a 14bit analog to digital
converter and a serial interface circuit on the
same chip. This results in superior signal quality,
a fast response time and insensitivity to external
disturbances (EMC). By having both temperature &
humidity sensors in a single sensor, the sensorProbe2
can have up to a maximum of 2 temperature &
2 humidity sensors. This extends the capability
of the sensorProbe2 to maximum of 4 sensing parameters.
Sensor Integration
The sensorProbe2 works with every intelligent
sensor in the AKCP family. You can connect any
of these sensors in any combination to monitor temperature,
humidity, water leakage, Airflow , security, detect AC Power Line Voltage,
Measure DC Voltage, control relays, and much more.
The SP2 includes an integrated data collection
and graphing package to keep trends for airflow,
temperature and humidity sensors.
Dry contacts and drivers are available for monitoring
UPS status, security systems, air conditioning status.
Every sensor comes with our unique autosense feature.
Whenever a new type of sensor is plugged in, the autosense
will recognize it and re configure the SP2 to begin
monitoring it. In the event of an alarm or temperature
/ humidity threshold being exceeded, the SP2 has the ability
to send alert notifications using Email, SMS and SNMP
Traps.
Online firmware
update is also available.
The sensorProbe2s advanced encrypted micro code
updating program can update your firmware over the
internet.
A new web based interface with a user and administrator
login feature helps users to prevent unauthorized
access to the device and a powerful embedded system
logging features is available.
SNMP Integration
The SP2 is fully SNMP compliant and configurable.
Following initial configuration by the RJ45 port to
set basic parameters such as IP address, Subnet Mask,
Default gateway, SNMP community strings, trusted IP
addresses and trap destinations, the unit is fully
configurable from any SNMP terminal or Network Management
product. Setup is easy with the embedded web server.
There is a simple graphing utility integrated into
the SP2 which can monitor every temperature and humidity
sensor and can display a graphical report.
The sensorProbe2 is supplied with a MIB to allow its
interface to SNMP based Network Management systems
such as HP Open View, IBM Tivoli, CA Unicenter TNG
and others.
Once configured, the sensorProbe2's Humidity and Temperature Sensors can be easily
recorded by OverTime. OverTime finds the names for each of the sensors you have online,
finds the scale (C or F) used and configures itself accordingly.
See a demonstration of
OverTime's output from a sensorProbe2.
See and work with an Environment Sensor live on the Internet.
Download the Data Sheet for the sensorProbe2.
Need Acrobat : Download it here